Zyxel-communications 2602HW-C Manuel d'utilisateur télécharger pdf (Page 4)

Prestige 2602HW Series Quick Start Guide

2LAN: Use an Ethernet cable to connect a computer to a LAN port for initial configuration and/or Internet

access.

3 PHONE: Connect one or more analog telephones to these ports using telephone wires. These are FXS

(Foreign Exchange Station) ports.

4POWER: Use the included power adaptor to connect this power socket to an appropriate power source

(see the User’s Guide for power adaptors by region).

After you've made the connections, push in the power button to turn on the Prestige.

The PWR/SYS LED blinks during system testing and turns steady green if the testing is successful.

The LAN turns on if the LAN port is properly connected and blinks while sending or receiving data.

The DSL LED blinks during DSL line initialization and turns steady green when the Prestige has a DSL

connection.

The INTERNET LED turns steady green if the Prestige can access the Internet. It blinks when the Prestige is

sending or receiving data.

A PHONE LED turns steady green if a SIP account is registered for the corresponding PHONE port and blinks

when a call comes in or one of the connected phones is off hook.

•If a PHONE LED is on, skip to Section 2.7 to see how to make calls through the Internet.

• If the INTERNET LED is on but the PHONE LEDs are off, go to Section 2.2 and access the web configurator.

Then go to Section 2.4 and configure the Voice Configuration wizard screen.

• If the INTERNET LED is off but the DSL LED is on, go to Section 2 to configure your Internet access settings.

• If the DSL LED is off, there is a problem with the hardware or the phone line connection to the ISP.

2 Initial Configuration

You may configure the Prestige for Internet access in any one of these ways:

• Zero Configuration

1 2 3 4 5 6 7 8 9 ... 12 13

Pas de commentaire

Zyxel-communications 2602HW-C Manuel d'utilisateur Page 4