ZyXEL Communications B-5000 - Guide de l'utilisateur télécharger pdf (Page 187)

ZyAIR B-5000 User’s Guide

Accessing the ZyAIR via Telnet or Console Port 23-3

23.3 Console Overview

This section shows you how to access the ZyAIR using the console port and a terminal emulation

programme such as HyperTerminal. The console operation is set up as follows:

23.3.1 Console Port Connections

Step 1. Connect the power cord to the inline power injector and power outlet.

Step 2. Connect the "MIL-C-5015 style Ethernet cable" into the special Ethernet port on the bottom of

the ZyAIR.

Step 3. Connect the "RJ-45 Ethernet connector into the POWER & DATA OUT port on the inline

power injector.

Step 4. Use the "MIL-C-5015 style RS232 console port cable" to connect computer COM port and the

ZyAIR console port.

Step 5. You can now access the ZyAIR via a terminal emulator such as HyperTerminal.

23.4 Accessing the ZyAIR via HyperTerminal Example

You can use HyperTerminal to access the configuration of the ZyAIR in the same way as the Telnet

session:

Step 1. Click Start and then select Programs, Accessories, Communications, HyperTerminal.

1 2 ... 182 183 184 185 186 187 188 189 190 191 192 ... 286 287

Pas de commentaire

ZyXEL Communications B-5000 - Guide de l'utilisateur Page 187